1. Elmquist, J., and Eriten, M., “Sensor Design for Nanoscale Material Failure Testing: Cantilever with an Essentially Nonlinear Attachment,” ASME 2013 Int. Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, August 2013. 2. Nowell, D., Brake, M., and Eriten, M., “Defining the Mechanisms of Friction: A Grand Challenge in Interfacial Mechanics,” ASME 2013 Int. Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, August 2013. 3. Eriten, M., “Multiscale Modeling Framework for Jointed Structures,” ASME 2013 Int. Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, August 2013. 4. Patil, D., and Eriten, M., “A Model for Adhesive Wear Particle Volume using Extended Finite Element Modeling” SES/ASME- AMD 2013 Symposium, Providence, RI, July 2013. 5. Alshaya, A. A., Petzold, S., Eriten, M., and Osswald, T., “Friction Coefficient Measurements Using a Timoshenko and Van Karman Device: Bulk Polymers”, ANTEC 2013 Polymer Analysis Division, Cincinnati, OH, April, 2013. 6. Truster, T., Eriten, M., Masud, A., Bergman, L. A., and Polycarpou, A. A., “Variational Formulation for Frictional Interface Dynamics,” ASME 2012 Int. Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, August 2012. 7. Kurt, M., Eriten, M., McFarland, D. M., Bergman, L. A., and Vakakis, A. F., “Nonlinear System Identification of a Cantilever Beam with Attached Cubic Nonlinear Spring At Its Free End,” ASME 2012 Int. Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, August 2012. 8. Eriten, M., Kurt, M., Luo, G., McFarland, D. M., Bergman, L. A., and Vakakis, A. F., “Nonlinear System Identification of Frictional Connections in a Bolted Beam Assembly,” ASME 2012 Int. Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, August 2012. 9. Eriten, M., Polycarpou, A. A., and Bergman, L. A., “A Physics-based Fretting Model with Friction and Integration to a Simple Dynamical System,” Proc. ASME 2011 Int. Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2011. 10. Eriten, M., Polycarpou, A. A., and Bergman, L. A., “Multiscale Physics-Based Fretting Models and Application to Mechanical Joints,” ASME 2011, Applied Mechanics and Materials Conference, 2011. 11. Lee, C.-H., Eriten, M., and Polycarpou, A. A., “Tangential Stiffness and Damping Measurements of Bolted Mechanical Joints via Contact Resonance Method,” ASME 2011, Applied Mechanics and Materials Conference, 2011. 12. Eriten, M., Polycarpou, A. A., and Bergman, L. A., “Effects of Surface Roughness on Fretting of Mechanical Joints,” Proc. of 2010 ASME/STLE Int. Joint Tribology Conference, 2010. 13. Vakis, A., Eriten, M., and Polycarpou, A. A., “Thin Lubricant Layer Contact Accounting for Interfacial Slip,” Proc. of 2010 ASME/STLE Int. Joint Tribology Conference, 2010. 14. Truster, T., Eriten, M., Masud, A., Bergman, L. A., and Polycarpou, A. A., “Modeling of Contact Interfaces: A Novel Computational Framework,” Proc. of 2010 ASME/STLE Int. Joint Tribology Conference, 2010. 15. Eriten, M. and Dankowicz, H., “A Rigorous Dynamical-systems-based Analysis of the Self- stabilizing Influence of Muscles,” Proc. ASME 2007 Int. Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2007. 16. Eriten, M. and Dankowicz, H., “Self-stabilizing Influence of Lower-limb Muscles,” 44th Annual Technical Meeting of the Society of Engineering Science, 2007. 17. Eriten, M. and Yesilyurt, S., “Optimal distribution of carbon nanotubes in gas sensor design,” 5th IEEE Conference on Nanotechnology, v 1, p 485-488, 2005. 18. Eriten, M. and Yesilyurt, S., “Optimal distribution of carbon nanotubes in H2 sensor,” 1st International Hydrogen Congress, 2005. |
Home > Publications >